Laminated Plywood Cutting CNC Router Bits

13-50-OC

Onsrud Cutter CNC Router Bit: Straight, Opposite Shear, Carbide Tipped, 1 Cutting Edge - Usage: Wood composites, Laminate, Veneer & Foam
(CW) = Composite Wood
(FP) = Foam Products
(LW) = Laminate and Veneer

37-80-OC

48-000-1-OC

Onsrud Cutter CNC Router Bit: Straight, Carbide Tipped, 1 Cutting Edge - Usage: Natural wood, wood composites, composite plastic and foam
+ Solid Carbide
* These tools are designed and toleranced for air routers with guide bushings.

48-000-2-OC

Onsrud Cutter CNC Router Bit: Straight, Carbide Tipped, 2 Cutting Edges - Usage: Natural wood, wood composites, composite plastic and foam
+ Solid Carbide
* These tools are designed and toleranced for air routers with guide bushings.

60-100C-OC

Onsrud Cutter CNC Router Bit: Spiral Compression, Solid Carbide, 1 Cutting Edge - Usage:
Helix Angle = 30°
* Helix Angle = 20°
(HS) = Hard surface double laminate geometry.
(HW) = Hardwood geometry.
(L) = Left Rotation Tool

60-100DC-OC

Onsrud Cutter CNC Router Bit: Solid Carbide Dual Core Compression Spiral - Double sided laminated, and veneered materials

60-100DC-OC

Onsrud Cutter CNC Router Bit: Solid Carbide Dual Core Compression Spiral - Double sided laminated, and veneered materials

60-100DE-OC

60-100MC-OC

Onsrud Cutter CNC Router Bit: Solid Carbide DE Mort Marathon Compression - Routing laminated and composite wood products

60-100SE-OC

Onsrud Cutter CNC Router Bit: Spiral Compression, Solid Carbide, 1 Cutting Edge - Usage:
Helix Angle = 30°
* Helix Angle = 20°
(HS) = Hard surface double laminate geometry.
(HW) = Hardwood geometry.
(L) = Left Rotation Tool

60-100TE-OC

Onsrud Cutter CNC Router Bit: Three Edge Mortise - Usage: Double sided laminated, veneered, natural wood and wood composites
(LW) = Laminated and Veneered
(HW) = Hard Wood
(CW) = Composite Wood
(MT/DT) = Mortising and Dovetailing

60-500m-OC

Onsrud Cutter CNC Router Bits - Four Edge Mortise Compression Spiral - Usage: Double sided laminated
(LW) = Laminated and Veneered
(SW) = Soft Wood
(HW) = Hard Wood
(CW) = Composite Wood
(MT/DT) = Mortising and Dovetailing

60-500-OC

Onsrud Cutter CNC Router Bits - Spiral Compression, Solid Carbide, 4 Cutting Edges - Usage: Double sided laminated and veneered, natural wood and wood composites
Helix Angle = 30°

60-600-OC

Onsrud Cutter CNC Router Bits - Spiral Compression, High Velocity, Solid Carbide, 4 Cutting Edges - Usage: High velocity routing of double sided laminated and veneered, natural wood and wood composites.
Helix Angle = 30°

68-100-OC

Onsrud Cutter CNC Router Bits - Single Edge PCD Compression Tool - Usage: Composite wood
(CW) = Composite Wood

72-000-OC

Onsrud Cutter CNC Router Bit: Hinge Bit - Brad Point - Through Hole - Left or Right Hand Rotation Boring Bits - Usage: Wood
(HW) = Hard Wood
(SW) = Soft Wood
(CW) = Composite Wood

72-001-OC

Onsrud Cutter CNC Router Bit: Hinge Bit - Brad Point - Through Hole - Left or Right Hand Rotation Boring Bits - Usage: Wood
(HW) = Hard Wood
(SW) = Soft Wood
(CW) = Composite Wood

72-002-OC

Onsrud Cutter CNC Router Bit: Hinge Bit - Brad Point - Through Hole - Left or Right Hand Rotation Boring Bits - Usage: Wood
(HW) = Hard Wood
(SW) = Soft Wood
(CW) = Composite Wood

72-003-OC

Onsrud Cutter CNC Router Bit: Hinge Bit - Brad Point - Through Hole - Left or Right Hand Rotation Boring Bits - Usage: Wood
(HW) = Hard Wood
(SW) = Soft Wood
(CW) = Composite Wood

72-004-OC

Onsrud Cutter CNC Router Bit: Hinge Bit - Brad Point - Through Hole - Left or Right Hand Rotation Boring Bits - Usage: Wood
(HW) = Hard Wood
(SW) = Soft Wood
(CW) = Composite Wood

77-025-OC

Onsrud Cutter CNC Router Bit: Single Edge Top Loading Router Bit Aluminum - Usage: Wood, Plastic, and aluminum
(SW) = Soft Wood
(HW) = Hard Wood
(SP) = Soft Plastics
(HP) = Hard Plastics
(A) = Aluminum

77-100-OC

Onsrud Cutter CNC Router Bit: Double or Three Edge Taper Tools - Usage: Wood, Plastic, and aluminum
(SW) = Soft Wood
(HW) = Hard Wood
(SP) = Soft Plastics
(HP) = Hard Plastics
(A) = Aluminum